🍳 Costs · Kitchen

Kitchen renovation cost in Spain in 2026

Cabinets, worktop, services, building work and appliances: how kitchen renovation cost is built and how to compare quotes.

Reading time8 min
LevelIntermediate
TypeRenovation
Key ideaSeparate cabinets, worktop, building work and appliances before comparing quotes.
IN 30 SECONDS

What you need to know

  • A kitchen combines building work and equipment, so a single total can hide major quality differences.
  • In the BricoDato example for 10 m², 5 linear metres, a full standard renovation and appliances included, the reference is about €17,670 and the range about €13,600–€23,500.
  • Relocating services, adding an island or choosing higher-grade cabinetry can move the total quickly.
01 · LEARN

The four blocks to separate

Break the quote into cabinetry, worktop, building work and services and appliances. If there is an island or peninsula, list it separately.

02 · LEARN

Indicative standard-kitchen example

For a 10 m² kitchen, about 5 linear metres of cabinetry, full renovation, standard quality and appliances included, the BricoDato estimator gives a reference around €17,670. The example range is approximately €13,600–€23,500.

The range is wide because cabinets, worktops, appliances and service alterations vary significantly.
03 · LEARN

How to compare kitchen quotes

  • Cabinet length and layout.
  • Door, carcass and hardware specification.
  • Worktop material and thickness.
  • Appliance brands and models.
  • Water, drainage and electrical points.
  • Demolition, waste and finishing.
04 · LEARN

Where savings are usually safer

Keeping existing water and drainage positions, avoiding unnecessary bespoke solutions and comparing worktop grades can contain cost. Cutting quality on frequently used hardware, electrical work or substrate preparation is usually a weaker saving.

05 · LEARN

Measure properly before ordering cabinets

A kitchen needs accurate measurements of walls, corners, columns, windows, service points, heights and access. Professional measurement before manufacture reduces expensive alterations.

COMMON QUESTIONS

Frequently asked questions

How long does a kitchen renovation take?

A full renovation can take several weeks across demolition, services, finishes, cabinetry and worktop installation. Manufacturing lead times can control the schedule.

Should appliances be included in the quote?

They can be included or excluded, but the decision and the models or allowance should be explicit.

Does an island add much cost?

It can, especially if it needs power, water, extraction or additional worktop material.

NEXT STEP

Continue with these tools